This is the star product introduced today, which is the v2 version of the Cartier tank series Andy Lau with the same mechanical men’s watch. I also wrote about the related evaluations of similar watches. The one written today is produced by JF, and the V2 version of Cartier has been greatly improved compared with the previous models. The dial is more delicate, the movement Equipped with the original 1904MC calibre, not only accurate time, but also the same. Let’s take a look at it.
The case is made of silver-white stainless steel, the case is rectangular, and the case is smooth and polished. The brightness of the case is relatively high, which can clearly reflect the surrounding scenery,replicas de relojes and the steel material has been resistant to abrasion and scratches. The V2 version of Cartier has been improved to be closer to authentic.
The label of the JF factory is attached to the mirror to distinguish it from other manufacturers. Let’s take a look at the mirror of this watch, which is very tightly attached to the case, the case is lower than the case on both sides, but the mirror is not flat. Here we can still see that the mirror surface is slightly raised. The material is sapphire glass mirror, and the mirror surface permeability after polishing is also very high, which is very similar to the original.
Looking at the work of our dials, the numbers on the dials are in Roman numerals. Since the case is rectangular, the time scale inside the dial is skewed. But this is also a reference to the authentic replica,replika órák including the texture on the dial is also in accordance with the authentic one-to-one reduction.
The enlarged dial has a very clear grain pattern, and the entire grain is undulating around the center of the pointer axis, and the width and width of each stripe path are exactly the same. It takes a lot of effort to make the dial’s texture so that the JF factory is as authentic as the details.
The English letters on the dial and the Roman numerals are overlaid on the wavy lines. The size of the 12 Roman numerals is almost the same as the authentic ones, especially the three-dimensionality of the numbers can be felt from the front. The face time scale of the square Cartier watch is on the inside of the Roman numerals, and each number scale is marked with black squares. In fact, these small details also reflect the quality of a watch.
This dial contains a calendar and a small seconds, with the calendar window at three o’clock. The outer ring of the calendar window is covered with black, and the inside is white matte texture. The difference between the numerical size of the calendar and the original is not very big. Although it can’t be completely restored, it is very good in the industry.rolex replika It is. Baked blue sword-shaped hands, the color is bright and smooth, and the polishing is extremely delicate.
The sides of the watch are made of stainless steel wire drawing. From this picture, the drawing is very delicate. This watch has only one crown for debugging. The shape of the crown is made up of an octagonal screw cap and a blue. The gemstone is inlaid, and there is no difference from the appearance of the crown.
The same drawing process is used on the other side, and the lugs on both sides are smooth, there is no sharp chamfer, and the digital scale on the bottom cover is seen from the side. You put the genuine at the same angle and you find that the two are unrecognizable. Who is true and who is fake.
The bottom cover is a square that is superimposed on the case so that the bottom cover becomes a square. The square bottom cover is fitted with a raised circular movement, and the beauty presented is self-evident.
The steel bottom cover is mainly made of wire drawing process, with 8 screws embedded in it, all concave on the bottom cover surface. Moreover, the layout of the screws is mainly composed of four corners. The three points are connected together to form an isosceles triangle. If we compare the position of the screws,rolex replica it is possible to connect the three points so that it can be clearly distinguished.
Cartier Andy Lau from the JF factory with the V2 version of the tank series automatic mechanical men’s watch equipped with the original 1904MC calibre, it not only has a low repair rate, including the time rotation in the dial, calendar jump and second disk beat is extremely accurate. We can see the thickness of the shrapnel on the shock absorber and the fineness of the workmanship to see the extraordinary movement.
The fan sheet is engraved with black Cartier English letters. The letters are arranged in the third last line. The letters on the outer ring are arranged in a circular arc shape, and the edges of the fan blades are polished. The degree of reduction is as good as the original one.
The buckle is a folding clasp. It is also made of stainless steel and is polished. The buckle is polished after the gloss is very dazzling. The details of the clasp are no different from the genuine ones.
The black leather strap not only has good softness, but also the wear resistance is restored. The texture of the strap is pressed according to the model, and it will not change due to the long time of the matching time.
Cartier watches in addition to men’s mechanical watches and women’s watches, the men’s Cartier’s surface is simple to work, the color is more men’s style,repliche orologi this silver-white Cartier wears a refined style in the hand.
Summary: JF factory v2 version of Cartier tank series Andy Lau with the same mechanical men’s watch shape did not make a slight change, but the movement’s improvement is a crucial step of this watch, the movement of the watch is not the thickness of the watch changes,rolex falsi including When the time goes, the calendar jumps, the second hand turns